Sealing the painted ping pong table provides an essential layer of protection and greatly reduces the chances of paint stains, warping, and rotting wood.
Also, it is ideal for everyday items such as decorative pieces, tables, kitchen chairs, etc.
Besides preventing the paint from chipping and peeling, the sealer also adds a layer of depth and shine that completes the wood item.
In this article, I will give you some tips and tricks on how to seal a painted ping pong table?
Without any further ado, let’s get started & Learn How To Seal Painted Ping Pong Table?
Table of Contents
What Does A Sealer Basically Do?
The sealer, also known as the topcoat, protects your paint against scratches, chips, and scratches.
Topcoats dry much more slowly than most other paints, making them harder to damage.
Furthermore, a sealer keeps your painted wood water-resistant and allows you to clean it without damaging the paint underneath easily.
The first time I painted my Ping Pong Table, I didn’t understand why a sealer would be needed.
Because after painting the walls for several hours, I decided not to seal them.
But it’s obvious that painting wood or a table is different from painting walls.
Unlike wood, dry walls absorb paint easily and are insecure.
Because the paint sticks on the wall so tightly to the walls, you cannot scratch them with nails.
It’s quite another thing to paint wood. The hardwood cannot be painted so easily.
Painting does not have as much connection to the old finishes as we usually do. Consequently, painted wood is prone to easily scratching and chipping.
It is very easy for the paint on the top to stain and scratch, and it is also difficult to clean.
So, when you are sealing your painted wood, you are protected from all these problems.
When Do You Need To Seal The Painted Ping Pong Table?
You may be confused about when to seal a painted ping pong table. Keep these basic guidelines in mind:
- When applying chalk paint to your Wooden Ping Pong Table, you always need to seal the finish with a topcoat or sealer.
- It would help if you usually sealed or topcoat your ping pong table after paint. It’s okay to leave the sealer if you are painting a piece of wood that won’t be used much.
- Make sure you are more tolerant of your wood until you’ve used it for a month. It can take up to 30 days for the paint to harden completely, even though it may feel dry to the touch.
- There are many paints that do not require a sealer. However, it is prone to scratching and fading. So, you can extend the life of your paint by using a topcoat on your ping pong table.
How To Seal Painted Ping Pong Table?
A wood sealer can be applied in a few different ways on your ping pong table:
- With a paint sprayer
- With a paintbrush
- With a wax brush
- With a rag or with an applicator sponge.
Depending on the seller you are working with, you will use a specific method.
- Be sure to read the application instructions from your specific seller. You may also want to pay close attention to the temperature recommendation. In very cold or very hot conditions, it may be impossible to achieve the same results.
- Be sure to shake your sealer well before installing it. But don’t shake the topcoat, as shaking the topcoat will cause bubbles to appear.
- In general, wood sealers should be applied in several thin, even coats. I usually apply three to four seller coats to high traffic pieces, but at least two thin sealer coats are recommended.
- If you apply your wood sealer with a brush, make sure it has long, even strokes.
- You should work from one side of your piece to the other so that your brush does not touch areas that have already started to dry out when you overlap your brush strokes.
- It would be best if you didn’t touch the finish before it has dried completely.
Generally, an average amount of sealer should suffice in most cases for your Ping Pong table. I believe you will be fine if you apply the first layer of the sealer, dry it for a long time, and repeat it three times.
Most of the sealer will be eaten up by the first layer, while the remainder will be easier. It seems logical to use a brush to apply the varnish.